الرئيسية
أحدث الصور
من طرف jaredthami الإثنين يوليو 11 2011, 11:20anybody with locked or not locked x10i,x10a,so-01b, please come here.
Greetings.
lets make some tests.
1.
make sure your x10i,x10a have standard semc android 2.1 firmware.
if not, flash such firmware.
2.
go to
menu->settings->applications->development->enable usb debugging, check it.
install "adb drivers" ( drivers\adb_drivers\x10_drivers )
3.
power off phone.
go to pda tab, select x10 as model, on options check "signed
mode,altbypass mode,do full unlock instead usercode reset", fill any
valid username/password.
press unlock.
when prompted detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )
DO NOT DETACH PHONE FROM AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط]
please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method. )
originally posted by
the_laser
br.DYNET
Greetings.
lets make some tests.
1.
make sure your x10i,x10a have standard semc android 2.1 firmware.
if not, flash such firmware.
2.
go to
menu->settings->applications->development->enable usb debugging, check it.
install "adb drivers" ( drivers\adb_drivers\x10_drivers )
3.
power off phone.
go to pda tab, select x10 as model, on options check "signed
mode,altbypass mode,do full unlock instead usercode reset", fill any
valid username/password.
press unlock.
when prompted detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )
DO NOT DETACH PHONE FROM AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط]
please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method. )
originally posted by
the_laser
br.DYNET
